.. _share-wares:

#############################
Share WARES on AAltSys Server
#############################

This basic guide describes moving **WARES** from a single user computer
or other shared drive onto an AAltSys Server. This guide is appropriate when 
the **WARES** copy is stored within an :file:`ATLAS` folder. When finished, 
**WARES** will be accessed from a server share mounted as drive :file:`W:\\` at 
each workstation.

.. note:: This guide assumes that WARES patches and support files have been 
   added to the **Shared** share or drive :file:`S:\\`. Make sure these files 
   are present beforehand.

Prep WARES on the old server
=============================

.. warning:: **WARES** must be prepped on its original server if it is 
   currently using a proprietary network driver.

#. From a workstation, log into **WARES** using the supervisor level password.
#. Press :kbd:`F2` to see all menus, choose :menuselection:`STARTUP`.
#. Select :menuselection:`Application --> Open`, and enter the account 
   :kbd:`SYSPROG`, password :kbd:`_____________`.
#. In the :guilabel:`Commands` window, enter :command:`RUNMENU LANPACK`.
#. Choose :menuselection:`Lanpack --> Network Type` from the menu.
#. Press :kbd:`F2` for options, and switch to :guilabel:`Microsoft Lan Manager`.
#. Press :kbd:`F9` to save the setting,  (A message will display saying revboot 
   is rebuilt.)
#. Choose :menuselection:`Exit` to exit the application.

Then copy the entire ATLAS directory from the old server to a flash drive or to 
a workstation C:\\ drive. Call if you have questions about what to copy.

Install an AAltSys Server
=============================

`Install an AAltsys Server <http://servers.aaltsys.info/install>`_, adding 
the following instructions specific to the WARES program.

Configure the AAltSys Server
-----------------------------

#. In :menuselection:`Users and Computers`, define groups **WARES** and 
   **FSUSERS**. Define all system users and add them to groups as appropriate.
#. In :menuselection:`File Sharing`, define the **wares** share as a directory 
   **wares** under Zentyal, checking :guilabel:`Apply ACLs Recursively`.
#. Set "administrator" Access Control permissions on this share for group 
   "WARES".
#. At a workstation, test to see that this share is visible, and map this share
   to drive letter :file:`W:\\`.
#. Define the **shared** share as a directory **shared** under Zentyal, and
   checking :guilabel:`Apply ACLs Recursively`.
#. Set "read/write" Access Control permissions on this share for group 
   "FSUSERS".
#. At a workstation, see that the share is visible, and map the share to drive 
   letter :file:`S:\\`.

Setup WARES on the Server
=============================

Copy WARES to the Server
-----------------------------

#. At a workstation, open the saved :file:`ATLAS` folder. If there is an 
   :file:`AREV` folder within :file:`ATLAS`, open that folder.
#. Press :kbd:`<Ctrl-A> <Ctrl-C>` to select all files within the open folder.  
#. Open the drive :file:`W:\\`, and click in the window.
#. Press :kbd:`Ctrl-V` to paste the contents of the folder into drive 
   :file:`W:\\`. 
#. Create folders :file:`W:\\exchange` and :file:`W:\\export`, if missing.
#. Copy the contents of :file:`S:\\arev` to :file:`W\\` (usually folder 
   :file:`patches`). 
#. If :file:`ATLAS` contained an :file:`AREV` folder, copy any other folders in 
   :file:`ATLAS` but not included in :file:`AREV`, such as :file:`CONNECT`, to 
   :file:`W:\\`.

Configure WARES on the Server
-----------------------------

#. Copy :file:`W:\WARES.pif` to a workstation desktop.
#. Double-click the :file:`WARES.pif` icon, and log into WARES at the supervisor 
   level.
#. Select :menuselection:`Tools --> Utilities --> Bundle` from the menu.
#. Press :kbd:`Shift-F1` to display the :guilabel:`SetVolume` window.
#. Enter volume name :file:`PATCHES`.
#. If the data location is :file:`..\PATCHES`, change it to :file:`.\PATCHES` 
   (that is, remove one period).
#. Press :kbd:`F9` to save changes and :kbd:`Esc` to return to Bundle Records.
#. Press :kbd:`Enter` to accept the default volume name, :file:`PATCHES`.
#. At :guilabel:`Filename`, press :kbd:`F2` and select :guilabel:`OTHER`.
#. Press :kbd:`Alt-T` to move to :guilabel:`Actions`, press :kbd:`F2`, and 
   choose :guilabel:`RESTORE`.
#. Press :kbd:`F9` to restore the WARES update.

.. note:: 
   Install other PATCHES update bundles using the same procedure, if desired.